Copyright 2017 Quilt Display Products ● Customer Service 937-506-0032 ● www.quiltdisplayproducts.com
HANGING INSTRUCTIONS
3
Step 2
Keeping the assembly from Step 1 in the same position, lay the binding of the quilt you
want to display in the groove. You should be looking at the back of the quilt at this point.
Center your quilt in the wall hanger and make sure no part of it interferes with the bolt
inserts.
Place the Back Center over the top of the front,
trapping your quilt’s binding between the
two parts. Be sure that the wedge is towards the top as shown below.
Insert four Long Phillips Head Bolts through the Back Center and into the front and tighten
them just enough to securely clamp your quilt in place. Use your hands to hold the front
and back together, gripping both edges to keep the top and bottom aligned while you
tighten the bolts.
