12
GP-1200 6-IN-1 SEEDER INSTRUCTION MANUAL
The electric seeder motor is activated
by the control boxes ON/OFF switch.
This motor drives the spiral brush that
dispenses the seed. (guard removed)
SEEDER MOTOR
This receiver is located on the rear of
the unit and is secured by a 1/2” x 3
hitch pin with clip. You can adjust the
height of the drag bar to allow more
or less metal grating to be in contact
with the ground.
Drag Bar Receiver
The drag bar and/or harrow mesh is
used for either leveling uneven areas
or for covering smaller seed that only
require a minimal amount of coverage
to germinate. You can adjust the
amount of harrow mesh swing allowed
by putting more or less tension on the
side chains.
Drag Bar with
Harrow Mesh
4
SEED FLOW CONTROL HANDLE
