Quietside QSCE-093, User/Instalation Manual, Page: 17 / 28

Controls and Components
Units are supplied with a wireless remote controller, which communicates with the unit Microprocessor controller
The return air temperature sensor mounted on the unit then controls the unit operation
Heat Pump units require the defrost sensor connecting between the Outdoor & Indoor units prior to operation
Several modes of operation are available to the end user depending on the type of comfort required
All unit operating functions are controlled via the remote controller
Unit operating modes are : Auto, Cool, Dry, Fan and Heat (Heat Pump only)
Optional Controls and Components
Low Ambient Controller : ICM 326H must be used in Data Room or Commercial applications
For a wiring diagram please contact Quietside or follow general diagram supplied with ICM Controller
Probe must be located in the fin pack or on a return bend that measures approx 100 DegF during normal
operation
Condensate Pump : Field Installed Mini Pump, Quietside recommend the Aspen brand of Condensate
Pump, follow their wiring diagram recommendations. This pump is installed externally to the unit
Follow Instructions, failure to follow instructions may cause
possible malfunction and void any warranty
Step 1
Remove Indoor and Outdoor units from the carton/box
Indoor unit carton contains Remote Control, Batteries and 25ft Defrost Sensor interconnect wire (HP only)
Ensure these are kept in a safe place during the installation process.
Step 2
Locate area to Install Indoor unit
Indoor unit must be located a minimum of 4ft from the floor and 4" from the ceiling
Choose an area where the wall is plumb and determine how to best to run the unit interconnects
4" from ceiling
8" from wall 8" from wall
Minimum 4ft from floor
Optimum 6ft plus from floor
Ensure no obstacles to Airflow are directly in front of the unit, for a minimum of 12ft for 9/12,000 Btu/h units
and 16ft for 18/24,000 Btu/h units
Do not install the Indoor unit units in areas exposed to high humidity (RH of 80% plus), direct sunlight and
direct heat from stoves or other devices
Installation and Maintenance Manual
Unit Installation
Indoor Unit