Quidel Lyme FIA Sofia 2, User Manual

Page: 21 / 49

Page 20 of 48
drive must be attached prior to beginning a test for that result to be saved. Press to save
the configuration and return to the Run Test screen.
Other Settings
Set Site Name and ZIP Code
The Site Name and ZIP Code settings set the name and location of the clinic, hospital, lab, or
physician’s office where Sofia 2 is being used.
In the field for
Site Name , use the on-screen keypad to enter the location name up to 20
characters and/or spaces.
To delete a letter, press
on the keypad.
Pressing at any time cancels the changes and returns the Site Name to the previous
setting.
In the field for ZIP Code, use the on-screen keypad to enter the 5-digit ZIP Code. The ZIP
Code entered for the facility in MyVirena must be used to successfully configure Virena.
When the Site Name and ZIP Code are complete, continue to Set Language and Sound by
pressing .
Set Language and Sound
Sofia 2 can be set to display languages that were previously installed from the Export,
Import, Delete menu (page 31).
Use or to select the appropriate language. This language will be displayed once the User
returns to the Run Test screen.
Setting the Sound on Sofia 2 will allow the Supervisor to turn on or off the beep
sound for notifications or when a barcode is scanned.
When the Sound is set, continue to set Barcode and Autoprint using .
Set Barcode Mode and Autoprint Mode
The Barcode Mode option allows for automatic or manual barcode scanning. When set to
automatic, the barcode scanner will always be on. When set to manual, the barcode scanner
will be off until the barcode scanner icon, , is pressed. This icon will be found on the
home screen. Press and the barcode scanner will illuminate for five seconds.
The Autoprint Mode option allows for the automatic printing of Patient, QC, and Calibration
results if the optional Dymo Labelwriter 450 is attached.
When the Barcode and Autoprint modes are set, continue to set Time and Date using .