6
Step 1
Unpack the RV Cover (#1) from the Storage Bag (#2) and lay it on a spacious, flat surface
near your RV, with its outside face upwards.
Step 2
Identify the front side of the cover, that is, where the Quictent logo is on.
Front Side
Step 3
Fold the cover from each side to the middle, then roll from back to front, till it is compact
enough for you to take and put it on the roof of your RV easily.
Installation
For easier and quicker assembly as well as your safety, we highly recommend
you have at least one partner (adults required) to work with you whenever
possible.
You will not use the two pieces of Adhesive Patches (#6 & #7) during the
installation. Please keep them for future use.
Before the installation, please check to make sure that you have all parts listed
on the
Parts List.
Step 4
With the help of a ladder, lay the rolled RV cover on the roof of your RV. Please make sure
the front side of the cover (where the Quictent logo is on) fits the front of your RV.
Summary of Contents for Class A RV Cover
Page 16: ......
