QuickWorldWide Little Quickie 8, Assembly And Maintenance Manual, Page: 40 / 57

Page 40 of 57
5-1 RUDDER PUSH ROD INSTALLATION Bag 11
No. Part No. Description Qty
1 HHI4070 Rudder Push Rod (in Box) 1
2 HHI4070E Rudder Push Rod End 2
3 ***** Electric Tape 1
4 HHI2900L Rudder Pushrod Guide 2
5 HHI2900I Rudder Pushrod Guide Insert 2
6 QP124 Shim Ball 1
7 HHI2M08P M2x8 Phillip Screw 1
8 ***** Servo Arm 1
9 ***** M3 Servo Phillip Screw 1
10 HHI2022 2.3 Long Ball End 2
11 ***** CA Glue 1
.The length of the Rudder Rod
measured from center to center
should be around 550 mm.
.Put electric tape around the Boom
before installing the Rudder Push
Guide in, so you can remove them
later.