Quicksilver 675PH — General Information
12
14. Thru Hull Locations
Depending on the type of boat, you may have underwater
fittings that need drain plugs. Garboard drain plugs and
fishbox drain plugs need to be in place before the boat goes
in to the water. Any fitting that will be underwater needs to
be plugged or the seacock needs to be closed.
The deck drains provide self-bailing capabilities while the
boat is static in the water and no passengers on board. This
prevents accumulation of water in the cockpit.
Sink drain
Forward bilge pump drain
Toilet water pickup
Waste tank vent
Overboard discharge
Port fish box drain
Cockpit drain
Livewell drain (if equipped)
Livewell pick up (if equipped)
Fuel vent
Aft bilge pump drain
Fish box pump out (if equipped)
Cockpit drain
Starboard fish box drain
Water tank vent
Heater exhaust (if equipped)
Anchor locker drain
Motorwell drain
Garboard drain plug
Summary of Contents for 675 Pilothouse
