Quicksilver 605BR Owner'S Manual Download | Manualshive

Page: 40 / 49

background image

Quicksilver® 605BR —

Electrical Systems

28

Battery Switch Operation

OFF Position

ON Position

1.

DC Electrical System

The DC electrical system is powered by a single battery, and is kept charged by the engine driven
alternator. The battery voltage is indicated by the voltmeter screen located on the SmartCraft®
tachometer.

2.

Battery

Quicksilver® recommends AGM type starting or a deep cycle battery for you boat. The battery must
meet the minimum capacity required by the engine manufacturer. Refer to your engine owner

’

s

manual for exact battery requirements.

To remove the battery cables:

1.

Turn off all items drawing power from the battery.

2.

Turn the battery switch to the OFF position.

3.

Remove the negative cable first, then the positive cable.

4.

To replace the cables, install the positive cable first, then the negative cable.

3.

Battery Box

The battery is located in the aft bench seat storage. It can be installed or removed by loosening the
strap and removing the lid on the battery box. The battery should always be installed and secured
within the battery box on your boat. This will ensure that the battery will not move around while the
boat is underway.

4.

Battery Selector Switch

Your vessel is equipped with a battery switch to control the delivery of DC power from the battery.
The battery switch panel is located in the aft bench seat storage tub. When you turn the battery
switch to the ON position, power is provided from the battery to the entire boat. To turn on power,
rotate the switch clockwise 90 degrees to the ON position.

Never use an open flame in the battery storage area. Avoid

striking sparks in the battery area.

Always disconnect the battery before doing any work on the

electrical system. Never turn off the battery switches or

disconnect the battery cables while the engines are running.

The bilge pump still draws power from the batteries, even if

the switches are set to OFF. This is especially important for

the bilge pump, so that they can operate anytime excess
fluid accumulates in the bilge, which can occur when the

boat is docked and unattended.

Never work on the electrical system while the system is

energized. Never leave the craft unattended with the

electrical system energized.

«
...
38
39
40
41
42
...
»

Summary of Contents for 605BR


















































Reviews:

No comments

Related manuals for 605BR

Sun Odyssey 490

Brand: Jeanneau Pages: 61

Brand: Malibu Boats Pages: 60

Brand: Malibu Boats Pages: 132

Brand: K.R. Skentelbery & Sons Pages: 16

Brand: Zboat Pages: 35

Squadron 48 IPS 700

Brand: FAIRLINE Pages: 212

RESPONSE TXi 2021

Brand: Malibu Boats Pages: 202

FX High Output WaveRunner 2006

Brand: Yamaha Pages: 151

Brand: NorthStar Pages: 2

SUPERJET 700 2006

Brand: Yamaha Pages: 111

Brand: West Marine Pages: 16

Advanced Frame 1

Brand: West Marine Pages: 20

Brand: Sea Ray Boats Pages: 92

Brand: Sea Ray Pages: 30

Brand: PRIJON Pages: 5

Brand: grabner Pages: 12

Brand: Aquaglide Pages: 29

Brand: Carver Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands