CHECK
OWNER S MANUAL
,
OBD2 CODE SCANNER
11
7). Use the
UP/DOWN
scroll buttons to select the system from the
Select
System
menu and press the
Y
button.
If the scan tool fails to communicate with the selected Vehicle's ECU(Elec-
tronic Control Unit). a "
LINK ERROR
"”message shows up on the display.
√
Verify that the ignition is ON:
√
Check if the scan tool's 0BDII connector is securely connected to the
vehicle's DLC;
√
Verify that the module supported;
√
Turn the ignition off and wait for about 10 seconds. Turn the ignition back to
on and repeat the procedure from step 5.
if the "
LINK ERROR
" message does not go away, then there mig ht be
problems for the scan tool to communicate with the module being tested.
The most common cause is that the scanned module is not supported on the
vehicle.
Main Menu
====================
1) VW/AUDI
2) OBDII/EOBD
3) Oil Reset
4) System Setup
Select System
======================
01) Engine
02) Auto Trans
15) Airbags
03)ABS Brakes
08) Auto HVAC
09) Cent Elect
5). Press the
Y
button. The
Main Menu
will be observed on the Display.
6). Use the
UP/DOWN
scroll buttons to select
VW/AUDI
from the menu
and press the
Y
button.
