quicklink.tv
2
Take the camera mounting plate included with the camera. Screw
the mounting plate onto the housing roof of the Studio-in-a-box
using the 4 screws (Provided by Quicklink) with a 2.5mm Hexagon
Bit screwdriver head.
IMPORTANT:
When completing this step, please ensure that the four screws provided by
Quicklink are used. Failure to do so may result in permanent damage to the motherboard.
Lift the PTZ camera onto the camera mounting plate inside the
Studio-in-a-box, aligning the holes on the camera to the mounting
plate and then rotating the camera roughly 15 degrees.
3
4
