QuickLabel Systems pronto! 482, User Manual

Page: 217 / 256

Pronto! 482/486/682/863 13-5
Save settings
You can save the printer configuration to a memory medium (memory card,
USB flash drive, Internal Flash File System) in the default card slot. The
configuration will be saved as XML file in the folder \MISC of the CF card.
The current date is used as file name YYYYMMDD.XML (e.g. 20070427.XML
for a file saved on 04-27-2007).
1 Insert memory medium.
2 Press the menu button.
3 Select Service > Save settings menu.
4 If the function Save settings is protected via a PIN, use the arrow buttons
to enter the code number and confirm with the
↵
button.
Saving of the configuration data starts. OK is shown in the display when
the entire saving procedure is complete.
5 Press the
↵
button.
6 Do not remove the memory medium until the saving procedure is
complete.
An error message appearing during the saving procedure may be caused by
an unreadable medium (e.g. unknown card type, unformatted card).
Information on formatting the CF card is found in
Format card on page 15-7.
Note: Access only possible with memory medium in the default card slot.