QuickJack 3500SLX, Setup And Operation Manual

Page: 5 / 144

QuickJack™ Portable Car Jack
5
P/N 5900263 — Rev. B6 —September 2023
Shipping
Your QuickJack was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
To protect yourself, do not sign the bill of lading until after you have inspected the
shipment.
If any of the items listed on the bill of lading are missing or are damaged, do not accept the
shipment until the carrier makes a notation on the bill of lading that lists the missing and/or damaged
goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety
Refer to ANSI/ALI ALIS Standard (current edition)
Safety Requirements for Installation and Service of
Automotive Lifts for more information about safely installing your QuickJack.
Important
Before proceeding any further, we suggest checking the
QuickJack Website
to
ensure you have the latest version of the manual for your QuickJack.
⚠
WARNING California Proposition 65 : This product can expose you to chemicals including
styrene and vinyl chloride which are on the list of over 900 chemicals identified by
the State of California to cause cancer, birth defects or reproductive harm. Always
use this product in accordance with BendPak’s instructions. For more information,
visit www.p65warnings.ca.gov .
Important Safety Instructions
When using your QuickJack, basic safety precautions should always be followed, including:
1.
Read all instructions.
2. Do not touch hot parts; you could be burned. Always use care with the equipment.
3. Do not operate equipment with a damaged cord or if the equipment has been dropped or
damaged — until a qualified service person has examined it.
4. Do not let a cord hang over the edge of a table, bench, or counter or come in contact with hot
manifolds or moving fan blades.
5. If an extension cord is necessary, a cord with a current rating equal to or greater than that of the
equipment should be used. Cords rated for less current than the equipment may overheat. Care
should be taken to arrange the cord so that it will not be tripped over or pulled.