Quickie WheelDrive, User Manual

Page: 31 / 40

31 WheelDrive
During normal usage, the following signalling can occur
Signal Eff ect Notifi cation Solution
Long beeps for
several seconds
Braking on the
motor activated Speed is getting too
high Slow down to 2 km/h
Battery indication
off for approx.
4 seconds then
blinking and beeping
for approx 7 seconds The power assist
will switch to
less accurate
method of
battery capacity
measurement Loss of contact with
battery management
system Replace battery pack
Long beeps
Power will be
switched off Power assist not used
for 15 minutes Turn on the system if you want
to use the power assist again
Wheel handle not
closed Close the wheel handle and
put on the system if you want
to use the power assist again
Battery is empty Recharge your batteries and
put on the system if you want
to use the power assist again
Speed is too high Slow down the wheelchair
to a standstill and put on the
system if you want to use the
power assist again
OFF button is pushed Put on the system if you want
to use the power assist again
3 beeps,
repeating until
rotation stops
Possibly damage
to charger cable
or connector Wheel is rotating
while charger is
connected Stop rotating the wheel
If the issue cannot be solved, please contact
your dealer.