Quickie Quickie Revolution, Owner'S Manual

Page: 24 / 47

20 Revolution
Issue 5
Chair features
Fig. 19
Fig. 20
2 1
4 3 2 1
Anti-tip tubes
To fit anti-tip tubes (Fig. 19), hold
the release pins (1) in and insert
the anti-tip tube into the receiver
(2).
To remove the anti-tip tube hold the
release levers in and slide the
tubes out. In some instances it can
be wise to rotate the tubes through
180
O
, hold the release pins in and
rotate the tubes through 180
O
,
allowing the locking pins to click
into position. Note the rear wheel is
shown removed for clarity.
Quick-release axles
To remove quick-release axles
(Fig. 20) simply press the quick
release button (1) which is located
in the wheel hub (2), and grip the
wheel through the spokes (3)
around the hub and pull the axle
out of its sleeve (4). To replace,
slide the axle into the sleeve until
the release button ‘pops’ out.
Warning:
The axle is not secure until the
outside quick-release button pops
out to its fully extended position.