background image

SUNRISE LISTENS

Thank you for choosing a Quickie wheelchair. We want to hear
your questions or comments about this manual, the safety and 
reliability of your chair, and the service you receive from your
Authorized Dealer. Please feel free to write or call us at the
address and telephone number below:

Sunrise Medical (US) LLC

Customer Service Department

2842 Business Park Ave

Fresno, CA 93727 USA

(800) 333-4000

Be sure to register your wheelchair and let us know if you change 
your address.   This will allow us to keep you up to date with 
information about safety, new products, and options to increase 
your use and enjoyment of this wheelchair.

You can also register your wheelchair at: 
www.sunrisemedical.com/help-support/register-my-wheelchair. 

FOR ANSWERS TO YOUR QUESTIONS

Your Authorized Dealer knows your wheelchair best, and can 
answer most of your questions about chair safety, use and mainte-
nance. For future reference, fill in the following:

Supplier: ______________________________________________________

Address: ______________________________________________________

______________________________________________________________

Telephone: ____________________________________________________

Serial #:_______________________Date/Purchased:

___

__

________________

INFORMATION YOU SHOULD KNOW

No component of this chair was made with Natural Rubber Latex.

DISPOSAL AND RECYCLING INFORMATION

When this product reaches the end of its life, please take it to an

approved collection or recycling point designated by your local or

state government.  This wheelchair is manufactured using a variety

of materials,  Your product should not be disposed of as ordinary

household waste.  You should dispose of your wheelchair proper-

ly, according to local laws and regulations.  Most materials that are

used in the construction of this product are fully recyclable.  The

separate collection and recycling of your product at the time of

disposal will help conserve natural resources and ensure that it is

disposed in a manner that protects the environment.

Ensure you are the legal owner of the product prior to arranging

for the product disposal in accordance with the above recommen-

dations.

USER WARNING

WARNING

Attention wheelchair users, do not operate this wheelchair with-
out first reading this owner’s manual. If you do not understand the 
instructions and warnings of this owner’s manual please contact 
your Authorized Dealer before operating this Quickie wheelchair. 
Failure to do so may result in damage and/or injury.

DEALER/TECHNICIAN WARNING

WARNING

Attention dealers and qualified technicians, do not operate or serv-
ice this wheelchair without first reading this owner's manual. If you 
do not understand the instructions and warnings of this owner's 
manual please contact the Quickie Technical Service Department 
before operating and/or servicing this Quickie wheelchair. Failure 
to do so may result in damage and/or injury.

ELECTROSTATIC DISCHARGE

WARNING

Power wheelchairs have printed circuit boards. Careful attention 
should be given to printed circuit board handling techniques to 
avoid damaging the control, and/or drive electronics of the chair, 
this could create a safety hazard.  Do not expose or remove print-
ed circuit boards.  Contact your Authorized Dealer for help with 
any electronics issues. 

Related Documents
Listed below are additional documents which are referenced in 
this owner's manual.

• RNET Owner's Manual:

PG Drives Technology CJSM2 Installation manual

• RNET OBP Owner's Manual
• RNET Omni

2

 Owner's Manual

• QM-710/715HD/720 Service Manual

I. INTRODUCTION

QM-710/715HD/ 720

2

www.sunrisemedical.com/
help-support/register-my-
wheelchair

MK-100158 Rev. G

MK-100158 Rev G

Summary of Contents for QM-710 BC

































Reviews: