K. ARMREST RECEIVER ATTACHMENT
Mounting
1.
Place the two clamp receivers (A) over the top portion of the rear side frame tube .Align with the single
post height-adjustable armrest.
2.
Pinch both clamp receivers together at the armpost receiver side and insert into the armpost receiver .
3.
Once inserted, pinch both clamp receivers together on the far side of the armpost receiver.
4.
Hold both clamp receivers against the top portion of the rear side frame tube and fasten(C) .
Adjustment
1.
To adjust the fit of the Single Post Armrest in the receiver, loosen the 4 hex bolts (D) by using a 7/16"
wrench .
2.
With the armrest assembly in the receiver (B), press firmly on the outside of the receiver.
3.
Maintain pressure on the receiver and re-tighten two of the hex bolts (D).
4.
Remove the armrest assembly and re-tighten the remaining two hex bolts.
5.
The armrest will fit firmly in the receiver and lessen any noise that may result from vibration.
L. PADDED SWING-AWAY ARMRESTS
Swing-away armrests (F)can be detached or can swing away to allow lateral transfers. They are height adjustable
(1" increments) by moving bolt (E) up or down in predrilled holes on armrest bracket.
Additional height can be achieved by removing bolts (G), flipping and rotating the receiver to opposite (H).
Ensure bolts (G) are retightend.
Swing-away, removable armrests are installed by sliding armrest into receiver (H) on back frame.
43
42
41
40
39
MK-100071 RevC
22
Q UI C KI E 2 L I T E
IX. DEALER SERVICE AND ADJUSTMENT
A
B
B
A
C
D
E
F
G
H
42
41
40
39
43
