6
IT
BOW THRUSTER BTQ250 - BTQ300 IT EN - REV006A
• Le estremità arrotondate del tunnel limitano l’innesco di turbolenze e cavitazione, migliorando le prestazione della spinta
dell’elica e riducendo al minimo la rumorosità.
• Quando l’imbarcazione è in movimento, la forza prodotta dal flusso dell’acqua produce della resistenza sulla faccia
posteriore del tunnel, che diventa un’area esposta frontalmente al flusso dell’acqua. Per limitare questo fenomeno,
prevedere una rientranza nella parte posteriore del tunnel. In alternativa, realizzare un deflettore nella parte anteriore del
tunnel.
• Nel caso in cui il tunnel sia vicino alla linea di galleggiamento è consigliabile
prevedere l’inserimento di una grata all’estremità del tubo.
La grata deve avere maglie verticali e più larghe possibili, per non contrastare
la spinta dell’elica.
Le maglie verticali impediscono l’ingresso della maggior parte degli oggetti
galleggianti.
INSTALLAZIONE