EN
BTQ110-125 INSTALLATION AND USE MANUAL - IT EN - REV004A
23
BTQ110/125
4 - Installation
4.3 - Gearleg and motor support flange
• Assemble the motor on the flange by joining
the two elastic coupling halves.
Fasten it with the provided 4 screws and washers.
• Proceed with fitting the gearleg with the special seal
gasket.
• For further protection against the entry of water, apply
silicone for nautical use around the point of contact be-
tween flange and tube.
• Fasten everything to the flange using the special screws
and washers.
• Insert the propeller A in the gearleg B, fix the propeller
with the self-locking nut C, insert anode D and lock it with
the other self-locking nut C.
A
C
C D
B
4.4 - Propeller fitting
WARNING: on conclusion of assembly, make
sure that the propeller is exactly positioned at
the central point of the tunnel.
ELASTIC
COUPLING
ELASTIC
COUPLING
SILICONE