1 - Information about the product
EN
18
BT DC-AC185-250-300 -
INSTALLATION AND USE MANUAL - IT EN - REV001A
BT DC-AC185/250/300
1.0 - Installation requisites
It is strongly recommended to entrust a professional the predisposition and positioning of the tunnel in the hull.
These instructions are generic, and do not show by any means the details of the operations of presetting the thruster, which
falls under the competence of the shipyard. In case of problems caused by a defective installation, the installer will be held
responsible.
Despite all components and moving mechanical parts are of high quality, the correct installation of the propulsion unit is fun-
damental for a safe and efficient use of the boat, as well as of the same propulsion unit.
Please note that the installation of such unit is an operation requiring experience as well as technical competence. It is rec-
ommended to entrust the installation to competent staff and to consult the manufacturer or naval architects to fully evaluate
the entity of the work.
BEFORE USING THE THRUSTER, CAREFULLY READ THIS USER MANUAL.
IF IN DOUBT, CONTACT YOUR NEAREST QUICK
®
DEALER.
QUICK
®
RESERVES THE RIGHT TO INTRODUCE CHANGES TO THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE. IN CASE OF DISCREPANCIES OR ERRORS
BETWEEN THE TRANSLATED TEXT AND THE ORIGINAL ITALIAN TEXT, PLEASE REFER TO THE ITALIAN TEXT.
F
1.1 - Technical data
(*) L = positive cable + negative cable
MODELS
BT DC-AC 185 105
BT DC-AC 250 140
BT DC-AC 300 300
Propeller type
2 counter rotating
Tunnel Ø
185 mm (7” 18/64)
250 mm (9” 27/32)
300 mm (11” 13/16)
Motor Power
6,3 kW
8 kW
15 kW
Voltage
24 V
24 V
48 V
Fusible
275A CNL DIN
325A CNL DIN
350A CNL DIN
Thrust
105 kgf (231,5 lb)
140 kgf (308,6 lb)
300 kgf (661,4 lb)
Weight
28,2 kg (62.17 lb)
45,1 kg (99.43 lb)
57 kg (125.66 lb)
Limit thickness values of the tubes
min. 4,5 mm - max 6,5 mm
(min. 11/64” - max 1/4”)
min. 6,5 mm - max 11 mm
(min. 1/4” - max 7/16”)
min. 9,5 mm - max 13,5 mm
(min. 3/8” - max 17/32”)
Recommended
cable section (*)
L < 5 m
35 mm
2
(AWG 2)
50 mm
2
(AWG 1)
95 mm
2
(AWG 3/0)
5,1 < L < 10 m
50 mm
2
(AWG 1)
70 mm
2
(AWG 2/0)
150 mm
2
(AWG 300MCM)
10,1 < L < 20 m
70 mm
2
(AWG 2/0)
95 mm
2
(AWG 3/0)
2 x 95 mm
2
(2 x AWG 3/0)