8
3) Enter the right password to enter the parameter setting menu.
Enter the initial password
1) The window displays “--” and the left hundred-digit flashes. At this time, the
hundred-digit number can be adjusted (you can enter the initial password
）
.
2) Input the initial password: Adjust the middle knob to change the hundred-digit number;
press “▲” key to move the digits and then ten-digit number began to flash, indicating that
it can be set in the same way as before. After the single-digit number is set, hold down the
“▲” and “▼” keys at the same time to confirm it.
3)
If the first password is wrong:
then directly enter the second password, and
the input method is same as the first time. (There are two chances of password input. If the
first password input is wrong, you can directly enter the second input.
）
4)
If the password entered twice is wrong
: the window will show “ERR”, and then
directly enter the main interface.
5)
If the first or the second password is correct
: then directly enter the parameter
settings, and the window shows “-1-”.
9.Parameter Setup
1) The password is entered correctly to access the parameter menu, and the sequence of
changes is shown in the following figure.
2) Click “▲” or “▼” button, select parameter menu-1, and return to the main interface
directly; after selecting parameter menu-2, press “▲” and “▼” buttons at the same time
to enter the new password setting.
