Quick Test microPAT, User Manual

Page: 6 / 16

4
Getting Started
Accessories
The microPAT is supplied with the following accessories:-

Charger

Test Lead Set

Short IEC Lead ( used for testing extension leads )
Charging
The microPAT must only be charged with the supplied charger. It is
supplied partly charged but we suggest you charge your tester for at least
1 hour to boost the charge before using for the first time.
Your MicroPAT tester will perform in excess of 2000 tests per full battery
charge. It can also be used while plugged into the charger.
Battery Indicator
The Battery/Charging indicator will flash green for the
first hour when connected to the charger. This is a fast
charge period. After this the indicator will be a steady
green. To fully charge the microPAT it needs to be
charged for 24 hours. It is ok to leave it connected to
the charger.
If an incorrect charger is connected the indicator will flash red and green.
During testing if the battery is low, the indicator will flash red. When the
battery is too low for the microPAT to operate correctly the indicator will be
steady red and the test will stop.
WARNING
Under no circumstance must mains voltage be
connected to the microPAT