Assembl
y Instructions - Sun Roof "Dubai" (78004,78005,78006, 78009,78010)
Pro
duct Info
Dear customer
, You have opted for a mobile sunroof as sun protection for your terrace. The sun
cano
py is water repellent against light rain shower equipped. In order to avoid damage you must
retract or
dismantle the sunroof from heavy rainfall and thunderstorms. Place the mobile sunroof
onl
y on a level surface and ensure stable stability with adequately heavy plates in the base (14kg
per plate).
Structure Parts
List (see Fig. Page 2)!
1. Remove the preassembled screws from the umbrella feet A. Form two cross-shaped stands each from a
short and a long umbrella foot element A. Now place the two feet B on the previously mounted cross-
shaped uprights, the holes must be covered. Screw the feet with the uprights from above. Tighten screws.
2. Insert the legs part C1 and C2 into the previously mounted feet.
3. Lift the guide elements of the fabric cover and push the short horizontal rail Dl through the guide elements
towards the end piece with the guide pulley. Please make sure that the two side-by-side holes point
downwards in this step! Insert the end piece with the guide pulley pointing upwards into the short rail and
screw it in place. The screw heads can be seen from below. insert the long horizontal rail D2 into the short
and screw it down. Lock the guide elements on both sides with the pins attached to the chain in the hole
provided on the horizontal rail.
4. Unscrew the nuts on the end pieces and insert the bolts into the supports of the legs. The two rollers are
now facing each other and point to the top! Unscrew the nuts. Adjust the angle of inclination over the
toothing as you wish and tighten the hand nuts to fix the roof.
5. Finally, pull the pull rope over the rollers. If you pull on the rope, the roof should be gently extended and
retracted. Details see Fig. Page 3.
dismantling
Dismantling takes place in reverse order Packaging and storage Pack and store the sunroof in a clean and
dry condition so that no mold can form. If parts are wet, let them dry well first.
Care Clean
The fabric with commercial polyester cleaner. The remaining elements can be treated with a damp cloth.
Technical specifications
Dimensions: 375x225x220cm. Frame made of powder-coated steel tube, rail 45x72cm, cover made of
100% polyester.
security Alert
Complain the feet of the sunroof always with min. 40x40cm
Washed concrete / paving slabs / umbrella stand plates (not included) to ensure a secure footing. The
plates must be inserted in the foot profile. In the case of a rising wind, retracting the roof is absolutely
necessary. This article may not be built on balconies. If disregarded, any warranty claim is excluded.
Ihr Team QUICK-STAR
