background image

4262 Network WAN Probe

1xT1/E1

Nx56/64bkps

E1/ 
FE1

European Remote Site

IP AccessESSPla

IP A

ESSPl

NTU

X.21/

WAN Probe

2 Network WA

4262 Network

N

ork W

W

Router

R

Rou r

o

42

1

IP Acce

IP A

Northern, Central & Eastern Europe

[email protected]

Southern Europe, Middle East & Africa

[email protected]

Asia / Pacific Rim

[email protected]

Latin, Central & South America

[email protected]

Canada

[email protected]

© 2007 Quick Eagle Networks. All rights reserved.   
PDF/05/07
The information presented herein may change without notice
and should be used for informational purposes only. 4262 WAN
Network Probe is a trademark of Quick Eagle Networks.

Headquarters

Quick Eagle Networks (USA)

830 Maude Avenue

Mountain View, CA 94043

+1 650-962-8282 Phone

+1 650-962-7950 Fax

[email protected]

www.quickeagle.com 

Access Speed

Network Interface

Network Port

Line Rate

Connector Type

Line Code

Framing

Output Level

Input Level

System Timing

Data rates

Management Connectors

COMM Port

Ethernet

WAN Protocols

Power Requirements

Voltage

Consumption

Regulatory

Diagnostics

Loopback Tests

Loopback Control

Test Patterns

Network Alarms

Physical

Dimensions

Weight

Environmental

Operating Temperature

Storage Temperature

Relative Humidity

Maximum Altitude

.                        T1

1 T1 ANSI 403 port
T1 (1.544 Mbps ± 50 bps)
100 ohm RJ-48C socket 

AMI or B8ZS
D4 or ESF
0 db, -7.5 db, or -15 db LBO
0 to -26 db
Network, Aux, internal
Nx56/64 kbps (N=1 through 24)

RJ-45 socket
RJ-45 socket

PPP, Frame Relay, and Cisco-HDLC

100 VAC to 240 VAC, 50-60 Hz or -40 
VDC to -72 VDC (both on the same platform)

9 W maximum

FCC Part 15, FCC Part 68, UL 1950
Third Edition, Industry Canada CS-03
VCCI Class 1 CAN/CSA C22.2 No. 950-95

T1 network, T1 payload, fractional T1 
payload, loop-up/loop-down commands

T1 set/reset codes, ESF FDL per 
AT&T 54016 and ANSI T1.403 Annex B

1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s, 
smart jack, two user-programmable 24-bit 
patterns, bit error injection

Net carrier loss, net sync loss, net AIS 
received, net yellow received, CRC, 
BPV, OOF threshold

1 RU, rack mountable

22.3 cm (8.75 in ) W, x 33 cm (13 in) D, x 4.13

cm (1.63 in) H
2.27 kg (5 lbs.)

0º - 50º C
-20º - 60º C
0 - 95% non-condensing
4.6 Km (15,000 ft)

E1

1  E1 G703/G704 port
E1 (2.048 Mbps ± 50 bps)
120 ohm RJ-48C socket or 75 ohm BNC

HDB3
ITU-T G.704/CTR 12
ITU-T G.703/CTR 12
0 to 20 dB
Network, DTE, Aux, internal
Nx64 kbps (N=1 through 31) (structured),
32x64 kbps (unstructured)

RJ-45 socket
RJ-45 socket

PPP, Frame Relay, and Cisco-HDLC

100 VAC to 240 VAC, 50-60 Hz or -40 
VDC to -72 VDC (both on the same platform)
9 W maximum

European harmonized standards 73/23 EEC, 

91.31/EED, 89/336/EED, 93/68/EEC, and  

91/263/EEC; UL 1950 3rd Ed.; CAN/CSA

C22.2 No. 950-95; Comision Federal de 

Telecommunicaciones; CISPR 22 Level B 

(EN 55022), RoHS compliant

E1 network, E1 payload, fractional E1 
payload, loop-up/loop-down commands 

E1 set/reset codes

1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s, two 
user-programmable 24-bit patterns, bit error 
injection

Loss of signal, loss of frame, remote 

alarm indication, alarm indication 

signal, CRC4, CV, FE

1 RU, rack mountable

22.3 cm (8.75 in ) W, x 33 cm (13 in) D, x 4.13

cm (1.63 in) H
2.27 kg (5 lbs.)

0º - 50º C
-20º - 60º C
0 - 95% non-condensing
3048 m (10,000 ft)

Reviews: