4
4
5
Attach Side Headers
Attach Side Headers (cont.)
Attach Center Header
• You’ll need 2x (B) Side Headers
• Insert the feet of (B) into slits on the tops of
(C), with “Flood Control” facing outwards and
the house diagram facing inwards.
• You’ll need 2x (G) Clear
• Clips with adhesive
backing
• Secure clip to top of
back wall
• Remove adhesive
backing and stick to
Side Header back
• Repeat steps for
other side
• You’ll need 6x (G)
Header Clips
• Holding the 2 headers
back to back, insert
header clips through
the 3 holes, 1 on each
side, fastening the
headers together
• Lower double sided
center header (A) onto
(D) by pulling the
bottom portion slight-
ly apart and sliding
down. This should sit
7” down and should
be centered on (D).
• Congratulations
the display is
assembled
and ready for
merchandise!
3
Assembling
Sides
• You’ll need:
2x (C) Side Bottoms
1x (D) Back Wall
4x (E) Clear Clips
• While holding (D),
place (C) perpendicular
to it, with both sitting
flush to the ground.
• Place Clip through
top hole on (C) and
secure to (D)
• Place Clip through
bottom hole and secure
to (D).
• Repeat these steps for
2nd Side Bottom.
• Once both sides are
attached, it should
stand freely on
its own.
Clip coming through
Side Bottom and
attaching to Back Wall
B E P R E P A R E D
B E P R O T E C T E D
Water Activated Flood Control
www.quickdams.com | 888-761-4405
THE NEXT GENERATION IN FLOOD PROTECTION
TM
