8
.
Accessories
9
.
Notices
1
. Do not install the indoor monitor at high temperature, high humidity place
or near TV.
2
. No touching the monitor screen with wet hands.
3. Please use only soft cloth to clean the monitor screen or camera in order
to get a clear image.
4
. Please avoid throwing or hitting the units.
5
. Image could be illegible if the camera is shined by strong light.
6. If you use internal wireless communication systems, image may be fuzzy
because of interference from radio waves.
■
One indoor monitor
■
One outdoor camera
■
One adapter
■
One bracket for indoor monitor
■
15M
cable
■
Screws
■
One adding card
■
One delete card
■
One user card
first ID card will be adding card, and the second will be delete card.
Fourthly,
turn off the power, and let the jumper wire to be RUN condition. The
zone of the outdoor station accordingly. If
there is a long ring sound after
the second ID card touching, the re-setting is successful.
be SET condition.
Thirdly,
turn on the power, and use two ID card to touch the ID card touching
Secondly,
please turn off the power, and let the ID unlock PCB jumper wire to
Firstly,
open the back cover of outdoor station.
Thirdly,
use the delete card to touch the same area. Then the user card is
deleted successfully.
9.3. The adding card and delete card are set well already. If the user loses the
adding card or delete card, he or she can re-program a new setting by doing
the following steps:
10
