Wuhan Questt Asia Technology CO.,LTD
Wuhan Questt Asia Technology Co., Ltd Address:
A7-101, Hangyu building, Wuhan University Sci & Tech Park, East
Lake High-tech Dev. Zone, Wuhan, Hubei, China
Tel: 00862787611146 Fax: 00862759908808 Http://www.questt.com.cn; Email:[email protected]
15
German Technology | Made in China
This is not a must-do when you firstly receive this machine. Only when you find the laser spot
is not round any more or the laser energy becomes very weak, you may consider to do laser
alignment.
A. Start the laser welder by twisting the key switch and set parameters as:
Curt=100A / Wid =1ms / Fre =1 Hz
B. Hold the ceramic dimmer chip and put it in front of the brass tube with your left hand. Now
the laser beam can be intercepted and becomes a green dot on the chip.
(B)
C. Adjust the two black screws as the following picture with your right hand until you find the
green dot roundest and brightest.
(C)
