When the Unit is in Operation
NOTE: Quest Engineering is not
responsible for any incorrectly flown,
installed or poorly positioned devices.
•
Ensure all amplifiers and mixers are turned
down before switching the system on.
•
If there is no sound, ensure all cabling
in the signal path is correct and where
applicable, the speakon connectors are
locked into place correctly.
Should any of the following irregularities be
found during use, immediately switch off all
electronics, disconnect all power supplies and
contact your original place of purchase:
•
If you detect smoke or a burning smell
coming from any device
•
If the unit is physically damaged in any
way
•
If the unit is malfunctioning (eg: no HF or
LF output, failing switches or intermittent
operation etc.)
Make no further attempt to operate the unit if
it is found to be in any of the above conditions
as this may result in fire or electric shock.
QM
600ASi
User Manual
User Manual
Q Motion Series
QM600ASi
4
