Quest Engineering Q1K, Owner'S Manual

Page: 3 / 12

2
• When cleaning the unit, ensure it has been
disconnected from any power source and
that only a dry cloth is used. Do not use any
aerosol or liquid based cleaners.
• Ensure all electronics are electronically
grounded (earthed) to a safety ground terminal
in order to avoid electric shock. Do not ground
any device to a gas pipe as this may result in
fire.
• Servicing of all electronics should only be
carried out by a certified Quest technician.
Please consult your original place of purchase
to find the location of your nearest Quest
service centre.
• When installing amplifiers and\or other
electronics only use the hardware specifically
designed for this product.
• Do not expose the unit to any moisture
whether rain, water or other liquids. Exposure
to moisture could result in damage to internal
components or electrocution\circuit failure.
• Do not cut, kink, otherwise damage or modify
speaker cable. Ensure a speaker cable with
a core diameter of at least 1.5mm is used for
correct performance.
• Do not install or place speaker cables or
this device near heaters, high traffic areas or
any area where the cables or device can be
damaged.
• Avoid installing or mounting speaker boxes,
amplifiers, electronics or cabling in unstable
locations.
• In the event of storms and\or lightning, ensure
all devices are disconnected from mains
power in order to prevent damage to any of
the units in the system.
General Caution