M120bt
M-Series
–
Front Panel Presentation
[Figure 1.1 Front panel diagram]
1. Input Channel Volume
–
These three knobs determine the level of the sound sources connected to the
inputs.
2. Tone Control
–
These two knobs adjust the overall frequency response of the system. They allow up to 10dB
of cut/boost on the 100Hz and 10kHz bands.
3. Master Volume Control
–
This knob determines the overall volume of the system.
4. Indicators (3)
–
The “Protect” indicator lights when the protection circuit is activated. The outputs are then
deactivated. The “Signal,
-
20dB and Clip” LEDs indicate the output level. The “Power” indicator lights up
when the device is powered on and ready for use.
5. POWER switch
- This switch turns the device on/off. The POWER indicator lights up when the power is on.
6. Bluetooth/FM Receiver and MP3 Player
–
This module includes Bluetooth, an FM receiver with memories
and an MP3 player on SD/SDHC card and USB port. The M120bt are delivered with an infrared remote
control.
7. AUX input
4
Summary of Contents for M120bt
Page 1: ...Owner s Manual M120bt...
Page 19: ...M120bt Block Diagram 17...
Page 21: ...M120bt Notes 19...
Page 22: ......
