leisure products
Quest Leisure
Page 4
1.2L Low Wattage
Stainless Steel Kettle
Product Code: K0016
Instruction Version: 2
Cleaning and Maintenance
• Unplug the base before cleaning.
• Allows allow the kettle to cool down before cleaning.
• Do not immerse the power cord, base or kettle in water. Simply wipe the kettle down with warm soapy water. To protect the outer surface
do not use abrasive cleaners to wipe the kettle. Once cleaned rinse the inside of the kettle with cold water to remove any soap which
could leave an unwanted aftertaste.
• The kettle will need periodical descaling. The interval of this descaling will depend on the hardness of water used.
• Do not attempt to maintain this product by yourself. Only a qualified competent person should maintain the product. For any malfunction
please contact the retailer you purchased it from.
• Do not leave water in the kettle when not in use to avoid mineral build up.
• Do not use scouring pads or abrashive cleaners as they may damage the surface of the kettle and impact performance.
General Use
• Open the lid by pressing on the button on the handle. The lid will open. You close the lid simply by pressing down on the lid until it closes.
• Fill the kettle with the required amount of water. IMPORTANT: It must be below and maximum indicated levels.
• Place the kettle on the stand and connect the stand to the power supply. Position the kettle so the spout is facing away from you.
• Press the power switch down. Once pressed down the switch will light up indicating that the kettle is on.
• Do not remove the lid while the kettle is boiling.
• Do not tip kettle upside down when pouring.
• Allow the kettle to cool thoroughly before re-filling. Never re-fill a hot kettle with cold water.