Things you'll need to assemble this kit
Information about Foam Parts, Paint and Fillers
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
11820 - Body Tube 3.5 Diam x 5.5" Long
11824 - Orange Capsule Base Shoulder Ring
16032 - Laser-cut Ring motor mount rear
16033 - Laser-cut Ring motor mount forward
16034 - Laser-cut Ring nose cone shoulder
FNC2 - Foam Capsule
10303 - Yellow Motor Mount Tube
49000 - Motor Clip
14000 - Blue Thrust Ring
50051 - Kevlar* Cord 18"
50011 - White Elastic Shock Cord 18"
50061 - Kevlar* Nose Cord
82302 - Parachute Sub-assy (3)
33069 - Laser-cut Balsa Fin Set - Small
33070 - Laser-cut Balsa Fin Set - Large
10008 - 3 inch launch lug
45010 - Lag Bolt Nose Weight
3014-1010 - Kit Instructions
3014-1030 - Decal
FNC1 - MMX Foam Nose Cone (2)
*Kevlar is a
registered
trademark of
Dupont
Hobby Knife, Pencil, Paint Brush and Razor Saw
Sandpaper
(220 or 320 & 400 Grit)
Elmer's Carpenter's Wood Filler
Wood Glue
Alphatic Resin glues
work best such as
TITEBOND or
ELMER'S
CARPENTER'S
WOOD GLUE
Tape & Paint
Scotch Magic
Tape or Paper
Masking Tape
and Foam Safe
Spray Paint.
(See below for
Foam Safety Info)
Many brands of Spray Paint are not "Foam Safe" and may melt the foam. ALWAYS test
the brand you intend to use FIRST before spraying the entire Foam part. We recommend
testing your paint on the base of the Large Foam Capsule before starting assembly (it
will get covered up by the Orange Shoulder and Cap Ring in STEP 13.) Most brands of
"Acrylic" or water based paint will not harm the Foam.
Only use water based fillers such as Elmer’s Carpenters Wood Filler
on your Foam Parts. Elmer’s Carpenters Wood Filler is a thick paste,
so we recommend thinning it with about 50% water to 50% paste.
Test on flat end of cone .
Parts List
MLAS
MLAS
Max
Launch
Abort
System
Max
Launch
Abort
System
Flying Model
Rocket Kit
Prod. No. 3014
Assembly
Instructions
Assembly
Instructions
A
B
F
G
I
J
K
L
H
M
N
O
P
Q
T
E
D
C
S
BEFORE STARTING ANY ASSEMBLY READ THROUGH ALL THESE INSTRUCTIONS. IT IS BEST TO TEST FIT
ALL PARTS BEFORE APPLYING ANY GLUE. READ AND FOLLOW THE N.A.R. MODEL ROCKET SAFETY CODE.
PAGE01
Summary of Contents for Flying ModelRocket KitL
Page 3: ......
