DL4300 Appliance
Configuring replication
293
UI Element
Description
This name can be optionally specified when
establishing replication on the source Core using the
Replication Wizard.
Machines
Lists the number of machines protected on the
source Core that are replicated to this target Core.
Sync
The date and time of the last replication transfer
from the source Core.
When you click the actions drop-down menu in this
column, you see a list of actions to perform to affect
the specific replication relationship.
You can perform actions on two or more of the source Cores listed in the Incoming Replication grid. To perform
actions on multiple source Cores, select the checkbox for each Core in the grid, and then, from the menu above
the grid, select the action you want to perform. You can perform the actions described in the following table.
Table 134. Global actions available in the Incoming Replication pane
UI Element
Description
Refresh
Refreshes the information shown in the table.
Force
Forces replication.
Pause
Pauses established replication.
Resume
Resumes paused replication.
Delete
Deletes incoming replication.
Parent topic
Configuring replication
To replicate data using Rapid Recovery, you must configure the source and target cores for replication. After
you configure replication, you can then replicate protected machine data, monitor and manage replication, and
perform recovery.