Quer ZAB0106, Owner'S Manual

Page: 28 / 48

28
Owner’s manual
EN
3. Steering L/R adjuster: restore straight driving when the car cannot move forward in
a straight line.
• When the car oversteers to the left, steering trim should be adjusted clockwise.
• When the car oversteers to the right, steering trim should be adjusted anticlockwise.
CONTROLLING THE CAR
1. Place the steering wheel on the transmitter.
2. Pair the frequency of the car and the transmitter.
• When being paired for the first time, both the car and the transmitter have to
be turned on within 3 seconds to pair the frequency. During pairing, the LEDs
on the car and the transmitter will flash; they will turn solid once the pairing is
successful.
• When pairing the frequency, please don't let anything touch accelerator, ensure
that accelerator does not appear deviation.
• In case pairing is not successful, please turn off both the car and the transmitter,
and repeat the pairing process.
3. Pull finger down on accelerator to move the car forward, push finger up to move the
car backward.
4. While pressing on accelerator, turn the steering wheel at the same time to turn the
car left or right.
NOTE : LED will flash when power is low on the car or the transmitter, please recharge or
replace the batteries before continuing.
Tips:
• Do not drive in windy, stormy, snowy or rainy weather.
• Keep away from rocks and water.
• Avoid the vehicle directly impacting with obstacles.
• Switch OFF the power when not in use.
• Remove all batteries from the vehicle and transmitter when not in use for a long
period.
• Keep fingers, hair and loose clothing away from wheels.
• The operating range can be affected by a variety of factors:
• low voltage of batteries in transmitter or vehicle
• obstacles interference