Mounting Instructions
Battery Activation
See Battery replacement (page 16) for battery installation.
• To activate the battery, pull out the battery pull tab.
NOTE : If the battery compartment is empty, the alarm cannot mount
on the mounting base.
• Connect the alarm to the base tail first, and then swing the alarm
closed onto the base until a “click” is heard. (See Figure 5)
NOTE: Please ensure that battery is installed prior to mounting of
smoke alarm.
Mounting
Base
Close alarm onto
base until it 'clicks'
Slide onto tail
until it 'clicks'.
Mounting Base
Close alarm onto
base until it 'clicks'
Slide onto tail
until it 'clicks'.
Figure 5
A.Mounting on the ceiling
B.Mounting on the wall
11
