2
Programming the Timer
First, using a small pointed object push
the reset button to clear all settings.
The reset button is just above the
“MIN” dark gray button.
RESET BUTTON
Setting the Clock:
• Press and hold the CLOCK BUTTON.
• Press the DAY KEY until the correct day is displayed.
• Do the same with the HOUR AND MIN. Now you have the clock set!
Setting the Timer:
There are 15 DAILY PROGRAM SETTING BUILT INTO THE TIMER.
Press the “day” key to scroll through these settings.
1. MO TU WE TH FR SA SU
2. MO
3. TU
4. WE
5. TH
6. FR
7. SA
DAY KEY
8. SU
9. MO TU WE TH FR
10. SA SU
11. MO TU WE TH FR SA
12. MO TU WE
13. TH FR SA
14. MO WE FR
15. TU TH SA
These can be used to simplify programming. All times must be the same for the days chosen! Let’s say you
want to open a gate Monday through Friday at the same time. Scroll down to #9 and you’ve got the days set!
If you want the timer to turn on and off on days selected from the 15 different programs, press the “day” key
and select one of the 15 programs. Press the “timer” key and the display will show “1 on” set the time you
want the unit to turn on by pressing the “hour” and “min” buttons respectively. To set the turn off time, press
the “timer” key again and “1 off” will show in the display. Again, set the “hour” and “min” time . If you want
more than 1 on/off per day, press the timer key again and set “2 on”, “2 off” until you reach the maximum of
8 on/off’s per day.
If you only want 1 on/off per day or if you have more on/off’s per day, when you are done programming
them in, press the “clock” key again and you are almost done. The timer is now set, but you need to push the
manual button until the line is under “auto” If you want to check what you have programmed in, press the
“timer” button and it will display the settings you have programmed. If you wish to change any or all on/off
times, you must “reset” the timer. You cannot change just one setting.
