— 8 —
u
WITH THE UNIT UNPLUGGED
, place the Hydroxyl
Generator vertically with the controls facing up and
remove the two retaining screws, one on each side
of the Plastic End Cap.
v
Gently remove the Plastic End Cap, screen and
carbon filter. Place used carbon filter in a plastic bag
and dispose of.
w
Install the new carbon filter, then replace the screen
and plastic end cap.
x
Re-insert the two screws.
y
Repeat for the other carbon filter located on the
opposite side.
IMPORTANT
The HG1500 should never be operated without the
screen or carbon filter in place.
Replacing the Carbon Filters
After approximately 60 days of use, both carbon filters should be replaced. The carbon filters are located at each end of the
Hydroxyl Generator and can be purchased through your distributor. Replace carbon filters as follows:
