12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901
16
.
8. Cup counter -Easy Access
Regency
1.
Push ”-” button in 6 seconds.
2.
After 4 seconds the signal will go faster..
The display shows:
”Total xxx cups”
3.
Push ”E” button.
The display shows:
”Choice 1 free xxx cups”
4.
Push ”E” button.
The display shows
”Choice 1 coin xxx cups”
5.
Push ”E” button.
The display shows
”Choice 1 xxx cups in can”
6.
Push ”+” button to reach to ”choice 2” etc.
7.
Push choice 3 to reset the counter.
8.
Push ”Stop” button to go back to user mode.
Cup counter:
The machine has an in built cup counter which is available to
see and reset with the key switch in ”cup” (normal) position.
Easy Access:
Volume and strength can be adjusted with±15% with the key switch
in ”cup” (normal) position.
1.
Push ”+” and ”-” button at the same time.
2.
After 4 seconds the signal will go faster.
3.
The display shows: ”Easy access” ”strength 1 100%”
4.
Go to right button(choice which you want to change
by p” or ”-” button.
5.
Push ”E” button.
6.
The display shows: for example. Volume 4 and”
Blinking 100%”
7.
Change by pushing ”+” or ”-” button.
8.
Push button 2 to confirm the change.
Press ”stop” to go back to mode.
8.
1.
3.
4.
6.
7.
5.
1.
5.
8.
++
+
-
- -
++
+
-
- -
