Quectel WCDMA UG FILE Series At Command Manual Download Page 2 | Manualshive

Page: 2 / 20

background image

UMTS/HSPA Module Series

WCDMA UGxx FILE AT Commands Manual

WCDMA_UGxx_FILE_AT_Commands_Manual Confidential / Released 1 / 19

Our aim is to provide customers with timely and comprehensive service. For any
assistance, please contact our company headquarters:

Quectel Wireless Solutions Co., Ltd.

Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233

Tel: +86 21 5108 6236

Email: [email protected]

Or our local office. For more information, please visit:

http://www.quectel.com/support/salesupport.aspx

For technical support, or to report documentation errors, please visit:

http://www.quectel.com/support/techsupport.aspx

Or email to: [email protected]

GENERAL NOTES

QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION
PROVIDED IS BASED UPON CUSTOMERS‟ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT

MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT

ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR

RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO

CHANGE WITHOUT PRIOR NOTICE.

COPYRIGHT

THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF

QUECTEL CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS

DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT

PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS

ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL

OR DESIGN.

Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved.

Quectel

Confidential

«
1
2
3
4
...
»

Summary of Contents for WCDMA UG FILE Series





















Reviews:

No comments

Related manuals for WCDMA UG FILE Series

Brand: Panasonic Pages: 27

Brand: Panasonic Pages: 78

Brand: Panasonic Pages: 98

Brand: NAiS Pages: 173

Brand: Panasonic Pages: 2

Brand: Ohsung Electronics Pages: 18

Brand: Abus Pages: 12

Brand: Bard Pages: 8

Brand: Bardiani Valvole Pages: 35

Brand: Samson Pages: 73

Brand: µ-Dimension Pages: 48

Brand: µ-Dimension Pages: 2

Omnicharge Solar OCS 100-20

Brand: tbs electronics Pages: 64

Red Atom PETRA01

Brand: Perenio Pages: 24

Brand: Rain Bird Pages: 48

Brand: Sullair Pages: 31

Brand: Intermatic Pages: 3

Brand: bluelab Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands