UMTS/HSPA(+) Module Series
UC200T-EM Hardware Design
UC200T-EM_Hardware_Design 32 / 68
3.10.
UART Interfaces
The module provides two UART interfaces: the main UART interface and the debug UART interface. Their
features are listed as below.
⚫
The main UART interface supports 4800bps, 9600bps, 19200bps, 38400bps, 57600bps, 115200bps,
230400bps, 460800bps and 921600bps baud rates, and the default is 115200bps. This interface is
used for data transmission and AT command communication.
⚫
The debug UART interface supports 115200bps baud rate. It is used for
Linux console and log
output.
Table 11: Pin Definition of the Main UART Interface
Table 12: Pin Definition of the Debug UART Interface
The logic levels are described in the following table.
Pin Name
Pin No.
I/O
Description
Comment
RI*
62
DO
Ring indicator
1.8V power domain
DCD
63
DO
Data carrier detection
CTS
64
DO
Clear to send
RTS
65
DI
Request to send
DTR
66
DI
Data terminal ready,
sleep mode control
TXD
67
DO
Transmit data
RXD
68
DI
Receive data
Pin Name
Pin No.
I/O
Description
Comment
DBG_TXD
12
DO
Transmit data
1.8V power domain
DBG_RXD
11
DI
Receive data
