LPWA Module Series
BG952A-GL_QuecOpen_Hardware_Design
44 / 72
Table 20: Operating Status of NET_STATUS
A reference design is shown in the following figure
.
Figure 20: Reference Design of NET_STATUS
3.18. STATUS
The STATUS pin is used to indicate the operation status of the module. It outputs high level when the
module powers on.
Table 21: Pin Definition of STATUS
The following figure shows a reference circuit of STATUS.
Pin Name
Indicator Status (Logic Level Changes)
Network Status
NET_STATUS
Flicker slowly (200 ms High/1800 ms Low)
Network searching
Flicker slowly (1800 ms High/200 ms Low)
Idle
Flicker quickly (125 ms High/125 ms Low)
Data transfer is ongoing
Always High
Voice calling
Pin Name
Pin
No.
I/O
Description
Comment
STATUS
20
DO
Indicate the module's operation status
1.8 V power domain
