LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual
20 / 29
2.6. AT+QGPSGNMEA Acquire NMEA Sentences
Before using this command, GNSS must be turned on via
AT+QGPS
, and set
<nmeasrc>
into 1
to
enable acquisition of NMEA sentences via
AT+QGPSGNMEA
.
Customers can disable sentences output via
AT+QGPSCFG="gpsnmeatype"
/"
glonassnmeatype"
/
"
galileonmeatype"
/"
beidounmeatype",0
. If sentences output is disabled,
AT+QGPSGNMEA
can still be
used to acquire NMEA sentences on condition that the GNSS has already acquired sentences via this
command after its activation. And the sentences acquired via the command will be the last ones that have
ever been acquired.
<errcode>
Integer type. The error code of the operation. If it is not 0, it is the type of error. Please
refer to
Chapter 4
for details.
AT+QGPSGNMEA Acquire NMEA Sentences
Test Command
AT+QGPSGNMEA=?
Response
+QGPSGNMEA: ("GGA","RMC","GSV","GSA","VTG","G
NS")
OK
Write Command
Query GGA sentence
AT+QGPSGNMEA="GGA"
Response
+QGPSGNMEA: GGA sentence
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Write Command
Query RMC sentence
AT+QGPSGNMEA="RMC"
Response
+QGPSGNMEA: RMC sentence
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Write Command
Query GSV information
AT+QGPSGNMEA="GSV"
Response
+QGPSGNMEA: GSV sentence
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
