background image

                                                                                                                                             

 

                                                                                                                            GNSS  Module  Series 

LG69T(AA,AD)_EVB_User_Guide                                                                                                            1  / 29 

 
 

 

 
At  Quectel,  our  aim  is  to  provide  timely  and  comprehensive  services  to  our  customers.  If  you 
require any assistance, please contact our headquarters: 
 
Quectel Wireless Solutions Co., Ltd.   

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 
200233, China   
Tel: +86 21 5108 6236   
Email: [email protected]

 

 

Or our local offices. For more information, please visit:   

http://www.quectel.com/support/sales.htm. 
 

For technical support, or to report documentation errors, please visit:   

http://www.quectel.com/support/technical.htm. 
Or email us at: [email protected]. 
 

Legal Notices 

We offer information as a service to you. The provided information is based on your requirements and we 
make every effort to ensure its quality. You agree that you are responsible for using independent analysis 
and evaluation in designing intended products, and we provide reference designs for illustrative purposes 
only. Before using any hardware, software or service guided by this document, please read this notice 
carefully. Even though we employ commercially reasonable efforts to provide the best possible experience, 
you hereby acknowledge and agree that this document and related services hereunder are provided to 
you  on an  “as  available”  basis.  We  may  revise  or  restate  this  document  from  time  to  time  at  our  sole 
discretion without any prior notice to you. 
 

Use and Disclosure Restrictions 

License Agreements

 

Documents and information provided by us shall be kept confidential, unless specific permission is granted. 
They shall not be accessed or used for any purpose except as expressly provided herein. 
 

Copyright 

Our and third-party products hereunder may contain copyrighted material. Such copyrighted material shall 
not be copied, reproduced,  distributed, merged, published, translated,  or modified without prior written 
consent.  We  and  the  third  party  have  exclusive  rights  over  copyrighted  material.  No  license  shall  be 
granted  or  conveyed  under  any  patents,  copyrights,  trademarks,  or  service  mark  rights.  To  avoid 
ambiguities, purchasing in any form cannot be deemed as granting a license other than the normal non-
exclusive,  royalty-free  license  to  use  the  material.  We  reserve  the  right  to  take  legal  action  for 
noncompliance with abovementioned requirements, unauthorized use, or other illegal or malicious use of 

Summary of Contents for GNSS Module Series































Reviews: