LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 98 / 231
7.12. ATS10 Set Disconnection Delay after Indicating the Absence of
Data Carrier
The command determines the amount of time (unit: tenths of a second) during which the UE remains
connected in absence of a data carrier.
Parameter
7.13. AT+CBST Select Bearer Service Type
The Write Command selects the bearer service
<name>
, the data rate
<speed>
and the connection
element
<ce>
to be used when data calls are originated.
ATS10 Set Disconnection Delay after Indicating the Absence of Data Carrier
Read Command
ATS10?
Response
<n>
OK
Write Command
ATS10=<n>
Response
This parameter setting determines the amount of time (unit:
tenths of a second) during which the TA will remain connected
in absence of a data carrier. If the data carrier is once more
detected before disconnection, the TA remains connected.
OK
Maximum Response Time
300ms
Reference
V.25ter
<n>
1-15-254
Number of tenths of seconds to wait before disconnecting after UE has indicated
the absence of received line signal
AT+CBST Select Bearer Service Type
Test Command
AT+CBST=?
Response
+CBST:
(list of supported
<speed>
s)
,
(list of supported
<name>
s)
,
(list of supported
<ce>
s)
OK
Read Command
Response
