background image

                                                                                                      5G  Module  Series

 

 
 

5G-M2_EVB_User_Guide                                                                                                                            2  / 34 

 
 

 

Trademarks 

Except as otherwise set forth herein, nothing in this document shall be construed as conferring any rights 

to use any trademark, trade name or name, abbreviation, or counterfeit product thereof owned by Quectel 

or any third party in advertising, publicity, or other aspects. 

 

Third-Party Rights 

This document may refer to hardware, software and/or documentation owned by one or more third parties 
(“third-party  materials”).  Use  of  such  third-party  materials  shall  be  governed  by  all  restrictions  and 
obligations applicable thereto. 

 

We  make  no  warranty  or  representation,  either  express  or  implied,  regarding  the  third-party  materials, 

including but not limited to any implied or statutory, warranties of merchantability or fitness for a particular 

purpose,  quiet  enjoyment,  system  integration,  information  accuracy,  and  non-infringement  of  any 

third-party intellectual property rights with regard to the licensed technology or use thereof. Nothing herein 

constitutes a representation or warranty by us to either develop, enhance, modify, distribute, market, sell, 

offer  for  sale,  or  otherwise  maintain  production  of  any  our  products  or  any  other  hardware,  software, 

device, tool, information, or product. We moreover disclaim any and all warranties arising from the course 

of dealing or usage of trade. 

 

Privacy Policy 

To implement module functionality, certain device data are uploaded to Quectel’s or third-party’s servers, 
including  carriers,  chipset  suppliers  or  customer-designated  servers.  Quectel,  strictly  abiding  by  the 

relevant  laws  and  regulations,  shall  retain,  use,  disclose  or  otherwise  process  relevant  data  for  the 

purpose of performing the  service only or as permitted by applicable laws. Before data interaction with 

third parties, please be informed of their privacy and data security policy. 

 

Disclaimer   

a)  We acknowledge no liability for any injury or damage arising from the reliance upon the information. 

b)  We  shall  bear  no  liability  resulting  from  any  inaccuracies  or  omissions,  or  from  the  use  of  the 

information contained herein.   

c)  While we have made every effort to ensure that the functions and features under development are 

free  from  errors,  it  is  possible  that  they  could  contain  errors,  inaccuracies,  and  omissions.  Unless 

otherwise provided by valid agreement, we make no warranties of any kind, either implied or express, 

and exclude all liability for any loss or damage suffered in connection with the use of features and 

functions under development, to the maximum extent permitted by law, regardless of whether such 

loss or damage may have been foreseeable. 

d)  We are not responsible for the accessibility, safety, accuracy, availability, legality, or completeness of 

information, advertising, commercial offers, products, services, and materials on third-party websites 

and third-party resources. 

Copyright © Quectel Wireless Solutions Co., Ltd. 2021. All rights reserved.

 

Summary of Contents for 5G-M2 EVB




































Reviews: