
ZK105M User Manual
1 Introduction
This document describes how the ZK105
M
enters transparent mode to debug module instructions.
The ZK105M Series are a series of water resistant GPS tracker designed for Scooter. Their built-in GPS
receiver has superior sensitivity and fast time to first fix (TTFF). Their LTE allows the ZK105M Series'
location to be monitored in real time or periodically tracked by a backend server or other specified
terminals. Their built-in 3-axis accelerometer allows motion detection and extends battery life through
sophisticated power management algorithms. It built-in high brightness color indicator and audio
broadcast function. It built-in high brightness color indicator and audio broadcast function. System
integration is straightforward as complete documentation is provided for the full featured @Track protocol.
The @Track protocol supports a wide variety of reports including emergency, low battery and scheduled
GPS position.
2
BLE
2.
1
BLE working mode
explanation
ZK105
M
is
installed in the SharedScooter and supplied by the main battery of Scooter. With the external
power(main battery of Scooter) supplying , the BLE of ZK105
M
works. Otherwise with the backup battery
of ZK105 supplying, BLE stops working.
2.
2
BLE
instructions
Heartbeat packet uploaded from ZK105
M
to Server includes 20 bytes dynamic password
(BLE Command Password).After successfully connected with the BLE of ZK105,It is able to
send command <AT+BKSCT=BLE Command Password,0$> to unlock Scooter or <AT
+BKSCT=BLE Command Password,1$>to lock Scooter by BLE channel.
3
NFC
NFC function can be set enable or disable through command. It need enable before applying NFC function.
3.
1
Enable/Disable NFC function
Command
to
enable
NFC
:
AT+GTVAD=ZK105,0,0,0,
1
,,,,FFFF$
Command
to
disable
NFC
:
AT+GTVAD=ZK105,0,0,0,
0
,,,,FFFF$
3.2
NFC
Instructions
After ZK105
M
NFC function enabled, it is able to take NFC tool to send command <AT+BKSCT=BLE
Command Password,0$>to unlock Scooter or <AT+BKSCT=BLE Command Password,1$> to lock
Scooter by NFC channel.
3