Page 2:
PC Manage Tool Quick Start
After these steps, GL300A will have some
basic tracking functions, such as fixed time
report and Geo-Fence. For other advanced
functions of GL300A, please refer to the
"GL300A @Track Air Interface Protocol" or
visit our website.
http://www.queclink.com
[email protected]
Run the GL300A Manage Tool. Select the correct COM
port and enter the default password "gl300a". Then
click “OK”.
If you want to test GL300A by SMS, please set the "Report
Mode" to "SMS" and enter the phone number intended to
receive SMS from GL300A in the "SMS Gateway". After
that, you can go to
Step 6
.
Otherwise, go to
Step 3
.
Set the "Report Mode" to "TCP Short Connection Mode" and
enter the server IP address and port number. Please ensure
that the IP address is accessible over the internet so that the
data sent from GL300A to the IP address can be received.
Please contact your SIM card provider to obtain APN
information for GPRS. Input it in GTBSI setting.
Click "Send" button to send the command and update the
parameters of GL300A. Then GL300A can report infor-
mation to the background server or SMS number.
Note: These commands can also be sent to GL300A by
SMS.
If you see the pop-up window shown below, GL300A has
received the configuration information.
Set the parameters of fixed time report so that GL300A
will report its position to backend server periodically.
Press “Send” button to update the parameters.
The following screenshot shows how to configure
GL300A to report its position every 3 minutes.
The following screenshot shows how to configure an elec-
tronic fence. Click the "Send" button to update the param-
eters.
Queclink
Confidential
Queclink
Grace Wang Checked
2017.11.20
