background image

GL100M User manual                                                                    

 

TRACGL100MUM001        

                                                                                                     

                    - 7 -   

 

3.

 

Getting Started 

3.1.

 

Parts List 

Name  

Picture 

Remark 

GL100M Locater   

 

 

The GSM/GPRS/GPS locator. 

AC-DC Power Adapter 

(Standard accessory) 

 

It is used to charge the internal 

battery of GL100M. 

Screw Driver 

(Standard accessory) 

 

It is used to twist off/ tighten the 

two screws on the side of GL100M 

when install SIM card. 

 

3.2.

 

Battery Charging 

z

 

Please connect AC-DC power adapter with GL100M. 

z

 

Insert the AC-DC power adapter into the power socket.   

z

 

During charging, the 

Red LED 2

 is blinking quickly. When the battery is full charged, the 

Green LED 2

 will be solid.   

z

 

Charging time is about 4 hours. 

Note: Before the first time using GL100M, please full charge the battery. 

 

3.3.

 

Install SIM Card 

z

 

Use a screw driver to twist off the two screws on the side of GL100M. 

z

 

Then remove the screws and SIM cover. 

z

 

Insert the SIM card into the SIM cover according to the direction shown. 

z

 

Finally, put the SIM cover into the SIM slot and tighten screws.   

Summary of Contents for GL100M












Reviews: