through the damper slot on the side of the chimney. Using a
small phillips head screwdriver, install and tighten the stop
screw/nut on the damper. Insert the two outer dampers (2 holes
in each) in the guides on the chimney assembly. Install and
tighten 2 stop screws/nuts in each damper.
NOTE:
Be sure to
orient the dampers to open to the front based on which side of
the firebox the chimney is to be installed.
Install the chimney on the firebox. (See Figure 1)
Bolt the
chimney to the firebox with (4) 1/4” x 3/4” SS Screws. Bolt the
face plate to the unused chimney connection on the opposite
side of the firebox.
Apply the gaskets.
Mock up the gaskets so they create a
continuous ring around the adapter plate and not covering the
chimney throat. Use the included sealant to attach the gaskets
on the kamado inlet plate (and the front door). The gaskets have
been pre-cut.
7
