Que Acoustics LLC
Charging
These earphones contain non-detachable, rechargeable batteries. Que Acoustics LLC is not liable for any damage or hazard caused due
to unauthorized tampering or attempted opening of the earphones. Any tampering will void the warranty.
Connect the micro USB connector on the charging cable to the port on the Q3E. Connect the USB connector on the cable to a phone
wall adapter/charger/car charger/computer/power bank or any device with a USB port. The LED will light up red to indicate charging and
will turn blue when the battery is fully charged.
Please charge the earphones fully before using for the first time.
Power On / Power Off
POWER ON
: Press the
(multi-function-button) for about 2 - 5 seconds until the LED flashes blue with a voice prompt ‘power on’.
POWER OFF
: Press
for 4 secs or so until the LED flashes red with a voice prompt ‘power off’.
LOW BATTERY ALARM
: The LED flashes red several times with a voice prompt ‘
Battery Low
’.
Pairing
Pairing and connecting with a
Bluetooth
device:
1.
Turn
Bluetooth
‘off’ on your device.
2.
On Q3E, press and hold the
until the LED flashes rapidly, alternating between red and blue. This indicates that the Q3E is in
pairing mode.
3.
On your device, turn
Bluetooth
‘on’, and scan for names until Q3E appears. Click on Q3E to initiate connection with the earphones.
Upon successful pairing the voice prompt will say ‘connected’ and the blue LED will continue to flash once every 5 – 10 seconds.
You only need to go through the above sequence once when you pair the Q3E with your Bluetooth device for the first time. Next time,
as long as your device has Bluetooth turned ‘on’, simply power on the Q3E and pairing will take place automatically. When successful,
the voice prompt will say ‘connected’ and periodically you will see a single flash of the blue LED.
On power up, if the blue LED on the Q3E flashes twice every 5 – 10 seconds, it indicates that the Q3E is not paired with any device.
Pairing with 2 devices:
Repeat steps 1 to 3 for pairing the Q3E with 1st device.
4.
Turn
Bluetooth
‘off’ on your 1st device.
5.
Repeat steps 1 to 3 to pair Q3E with the 2nd device
6.
On the 1st device turn
Bluetooth
‘on’ and click on Q3E to connect to the earphones. The Q3E will maintain the connection with the
2nd device.
7.
The Q3E will now be connected to both devices simultaneously.
8.
You can toggle between the 1st device and the 2nd device with a short click of the
.
Note:
If the Q3E has been paired with a device before, simply power it on by pressing the
until the blue LED flashes, and thee-
arphones will pair with the device automatically. (Bluetooth on the device must be turned ‘on’).
If your device has
Bluetooth
version 2.1 or older, you may need to enter the password “0000”.
If the pairing is not successful within about 90 seconds, switch off both the Q3E and your device, and repeat steps 1 through 3.
USB Port
LED
