Qudo QUDOC200BK, Instruction Manual, Page: 7 / 10

Setting the Clock
Setting the Alarm
1. The CLOCK button cycles through clock, alarm 1, alarm 2
with each short press.
2. To set the time press and hold the CLOCK button when
time is showing.
3. The hour digits will now flash. Press or VOLUME –
to set the required hour and press CLOCK to confirm.
4. The minutes will now flash. Press or VOLUME -
to set the required minutes and press
CLOCK
to confirm.
The clock setting is completed.
7/10
1. Press the CLOCK button until AL1 icon is lit, Alarm time preview
will show.
2. Press once again AL2 icon is lit, Alarm time preview will show.
3. Press and hold the
CLOCK
button when on
AL1
or
AL2
for
3 seconds to start alarm setting.
4. The hour digits will now flash. Press or VOLUME –
to set the required hour and press
CLOCK
to confirm.
5. The minutes will now flash. Press or VOLUME -
to set the required minutes and press CLOCK to confirm.
6. The clock setting is completed.
7. OFF will now flash. Press or
VOLUME -
to select
ON /OFF and press CLOCK to confirm. Alarm is now set.
8. Select the rings of the alarm. After finishing he adjustment of
the minutes, short press the clock key, marks of ‘OFF’, ‘ON’ or
‘ ’ and Alarm 1 would flash on LED screen, you are entering the
mode of alarm ring setting. Sort press the button of previous
track or next track, to select the ring of alarm. Short press the
clock key when the mark of ‘OFF’, ‘ON’ or ‘ ’is flashing, then
the alarm ring is selected.